Check threshold

Command

AT+TH?<sensor-address> <metric>

Response

+TH: <thresholds-enabled> <threshold-level-low> <threshold-level-high>

Description

Checks the threshold settings for the sensor with address <sensor-address>. The <thresholds-enabled> field will be either ‘0’ (not enabled) or ‘1’ (enabled). Both <threshold-level-low> and <threshold-level-high> are decimal strings (between 0 and 65535). When an invalid sensor ID is specified, only +TH: is returned.

Example

Command> AT+TH?=02 1
Response> +TH: 1 100 5000

Check the threshold settings for sensor 0x02, metric 1. Thresholds are enabled with threshold-level-low = 100 and threshold-level-high = 5000.