Set threshold interval

Commands

Enabling

AT+TE=<sensor-address> <metric> <thresholds-enabled> 

Threshold Low

AT+TLL=<sensor-address> <metric> <threshold-level-low>

Threshold High

AT+TLH=<sensor-address> <metric> <threshold-level-high>

Response

OK | ERROR <code>

Description

Set the threshold for the sensor with ID <sensor-address>. The <sensor-address> field and the <metric> are each a 2-digit hex string. The <thresholds-enabled> is 0 when disabled and 1 when enabled. When the threshold is changed successfully, the motherboard responds with OK. Otherwise, e.g., when an invalid sensor ID is specified, the response is ERROR followed by an error code.

Example

Command>  AT+TH=F1 01 01
Response> OK

Disable the threshold for metric 0xF1 of sensor 0x01.