List sensors

Command

AT+LS?

Response

+LS: {<sensor1> <sensor2> ...}

Description

List the sensors that are connected to the motherboard. The motherboard will respond with a space-separated list of sensors. In case no sensors are connected this list is empty. The <sensorX> field is sent as a 4-digit hex string in ASCII format as defined here. For a list of supported sensor types, see the sensor boards doc. Based on the sensor type, the UI can determine which metrics are supported.

Example

Command> AT+LS?
Response> +LS: 0168 0221

Two sensors are connected. Sensor 0x01 has type 0x68, sensor 0x02 has type 0x21.