TODO list for the developers

List of things that need to be looked into, organized on topic.

Motherboard

Measure current consumption
Redesign power supply (work-in-progress)
Silkscreen (needs to be more comprehensive)
Update documentation
When using immediate message format: the first received message will be send immediately, the second measurement will not be send and stored in the buffer, at the next interrupt from a module, the remaining buffer (from previous measurement) gets added to the new measurement. measuring -> app data available -> send lora -> new measurement payload This problem is not present when using data accumulation.

There is a ripple visible in the acoustic measurements originating from the wake up and sleep functionality of the motherboard. A small fluctuation of the supply voltage causes a visible spike in the measurement. The fluctuation is already smaller by removing Diodes 4 and 5, but then there is no possibility to use multiple supply voltages. If the wake up and sleep of the motherboard is more coordinated to not occur during a sound measurement, the problem can also be solved without altering the hardware.
Silkscreen (needs to be more comprehensive)

todo’s for the configurator tool
Make it possible to program the motherboard for a second time without the need of restarting the tool
check .exe release
Add extra functionality concerning the battery module
Disable polling for buttons
Incorporate “enable/disable data accumulation”

Support new message formats
Add extra functionality concerning the battery module
if more than x-time, no data is received in the databank, make the graph 0 for that time to make sure that when the measurements start again, no intersection line is drawn between the 2 points.